|
|
|
PUBLICATIONS |
|
Contents |
|
|
Journal Papers |
Book Chapters |
Conference Proceedings |
Presentations |
Technical Papers and Reports (Funded Projects) |
Ph.D. Dissertation & M.S. Thesis Supervised |
|
|
|
Journal Papers |
International
- "Agent-based resource model for relation-driven fractal organizations in a distributed production environment," with Moonsoo Shin and Kwangyeol Ryu, in preparation
- "Adaptive Vehicle Scheduling for Dynamic Inbound Supply Chain," KiyoulLee, Kwangyeol Ryu, Hyunbo Cho, and Mooyoung Jung, submitted, Special issue of Int'l J. of Production Research
- "Simultaneous Control of Vehicle Routing and Inventory for Dynamic Inbound Supply Chain," Kiyoul Lee, Hyunbo Cho, and Mooyoung Jung, Computers In Industry, Vol. 65, No.6, pp. 1001-1008, August August 2014, (http://dx.doi.org/10.1016/j.compind.2014.03.001), (SCIE, IF= 1.709, 5-Year IF=2.062)
-
"A fractal echelon approach for inventory management in supply chain networks," with Kwangyeol Ryu, Ilkyeong Moon, and Seungjin Oh, Special issue of International Journal of Production Economics, Vol. 143, No. 2, pp. 316-326, June 2013, (http://dx.doi.org/10.1016/j.ijpe.2012.01.002), (SCIE, IF= 1.988, 5-Year IF=2.411)
-
"Reconfiguration framework of a supply network based on flexibility strategies," Seungjin Oh, Kwangyeol Ryu, and Mooyoung Jung, Int'l J. of Computers & Industrial Engineering, Vol. 65, Issue 1, pp. 156-165, May 2013, (http://dx.doi.org/10.1016/j.cie.2011.11.016), (SCIE, IF=1.589, 5-Year IF=1.872)
-
"Reinforcement learning approach to goal-regulation in a self-evolutionary manufacturing system," Moonsoo Shin, Kwangyeol Ryu, and Mooyoung Jung, Expert Systems with Applications, Vol. 39, No. 10, pp. 8736-8743, August 2012, (http://dx.doi.org/10.1016/j.eswa.2012.01.207), (SCIE, IF=1.924, 5-Year IF=2.193)
-
"A goal-oriented trust model for virtual organization creation," Jungtae Mun, Moonsoo Shin, and Mooyoung Jung, J. of Intelligent Manufacturing, Volume 22, No. 3, pp. 345-354, June 2011, (http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s10845-009-0293-7), (IF=1.081)
-
"Virtual organization for open innovation: semantic web based inter-organizational team formation," with Hyeongon Wi and Seungjin Oh, Expert Systems with Applications, Vol. 38, No. 7, pp. 8466-8476, July 2011 (http://dx.doi.org/10.1016/j.eswa.2011.01.044), (SCI, IF=1.924, 5-Year IF=2.193)
-
"Collaborative fractal-based supply chain management based on a trust model for the automotive industry," with Seungjin Oh, Kwangyeol Ryu, Ilkyeong Moon, and Hyunbo Cho, Flexible Services and Manufacturing Journal (formerly IJFMS), Vol. 22, No. 3, pp. 183-213, 2010 (http://dx.doi.org/10.1007/s10696-011-9028-7)
-
"Modeling and analysis of project performance factors in an extended project-oriented virtual organization (EProVO)," with Hyeongon Wi, Expert Systems with Applications,Vol. 37, No. 2, pp. 1143-1151, March 2010 (http://dx.doi.org/10.1016/j.eswa.2009.06.051) (SCI, IF=2.908, 5-Year IF=3.162)
-
"A team formation model based on knowledge and collaboration," with Hyeongon Wi, Seungjin Oh, and Jungtae Mun, Expert Systems with Applications, Vol. 36, No. 5, pp. 9121-9134, July 2009 (http://dx.doi.org/10.1016/j.eswa.2008.12.031) (SCI, IF=2.596)
-
"Self-evolution framework of manufacturing systems based on fractal organization," with Moonsoo Shin and Jungtae Mun, Int'l J. of Computers & Industrial Engineering, Vol. 56, No. 3, pp. 1029-1039, April 2009 (http://dx.doi.org/10.1016/j.cie.2008.09.014) (IF=1.491, 5-Year IF=2.055)
-
"Manufacturing enterprise collaboration with a goal-oriented fuzzy trust evaluation model in virtual enterprise," with J. Mun, M. Shin, and K. Lee, Int'l J. of Computers & Industrial Engineering, Vol. 56, No. 3, pp. 888-901, April 2009 ( http://dx.doi.org/10.1016/j.cie.2008.09.022) (IF=1.491, 5-Year IF=2.055)
-
"Modeling and analysis of project team formation factors in a project-oriented virtual organization (ProVO)," with Hyeongon Wi, Jungtae Mun, and Seungjin Oh, Expert Systems with Applications, Vol.36, No. 3, Part 2, pp. 5775-5783, April 2009 ( http://dx.doi.org/10.1016/j.eswa.2008.06.116 ) (IF=2.596)
-
"r-FrMS: a relation-driven fractal organization for distributed manufacturing systems," with Moonsoo Shin, Jungtae Mun, and KyungHuy Lee, Int'l J. of Production Research, Vol. 47, No. 7, pp. 1791-1814, January 2009 (http://dx.doi.org/10.1080/00207540802036240) (2008, IF=0.774)
-
"Goal-balancing process for goal formation in the fractal manufacturing system," with Youngpil Cha, Moonsoo Shin and Kwangyeol Ryu, Int'l J. of Production Research, Vol. 45, No. 20, pp. 4771-4791, October 15, 2007 (IF=0.560)
-
"Effectiveness of vehicle reassignment in a large scale overhead hoist transport system," with Byung-In Kim, Seungjin Oh, Jaejoon Shin, Junjae Chae, and Sujeong Lee, Int'l J. of Production Research, Vol. 45, No. 4, pp. 789-802, February 15, 2007 (IF=0.560)
-
"Self-reconfigurable Software Architecture: Design and Implementation," with Jungtae Mun and Kwangyeol Ryu, Int'l J. of Computers & Industrial Engineering, Vol. 51, No. 1, pp. 163-173, September, 2006 (IF=0.650)
-
"Dynamic restructuring process for self-reconfiguration in the fractal manufacturing system," with Kwangyeol Ryu and Enver Yucesan, Int'l J. of Production Research, Vol. 44, No. 15, pp. 3105-3129, August 1, 2006 (IF=0.799)
-
"Conflict detection and resolution for goal formation in the fractal manufacturing system," with Moonsoo Shin, Youngpil Cha, and Kwangyeol Ryu, Int'l J. of Production Research, Vol. 44, No. 3, pp. 447-465, February 1, 2006 (IF=0.799)
-
"Generation of a flanking sequence-tag database for activation-tagging lines in japonica rice," with Dong-Hoon Jeong, Suyoung An, Sunhee Park, Hong-Gyu Kang, Gi-Gyeong Park, Sung-Ryul Kim, Jayeon Sim, Young-Ock Kim, Min-Kyung Kim, Seong-Ryong Kim, Joowon Kim, Moonsoo Shin, and Gynheung An, The Plant Journal, Vol. 45, No. 1, pp. 123-132, January, 2006 (IF=6.367)
-
"Bid generation and evaluation for MANPro-based real time scheduling," with Moonsoo Shin, Int'l J. of Production Research, Vol. 43, No. 18, pp. 3821-3836, September 15, 2005
-
"Requests network model for deadlock detection and avoidance in automated manufacturing systems," with Sanghoon Lee, Youngpil Cha, and H. Cho, Int'l J. of Production Research, Vol. 42, No. 16, pp. 3203-3218, August 15, 2004 (IF=0.558)
-
"Goal-orientation mechanism in the fractal manufacturing system," with Kwangyeol Ryu, Int'l J. of Production Research, Vol. 42, No. 11, pp. 2207-2225, June 1, 2004 (IF=0.558)
-
"MANPro: mobile agent-based negotiation process for distributed intelligent manufacturing," with Moonsoo Shin, Int'l J. of Production Research, Vol. 42, No. 2, pp. 303-320, January 15, 2004 (IF=0.558)
-
"Framework for Fractal-based Supply Chain Management of e-Biz Companies," with Kwangyeol Ryu and Young-Jun Son, Production Planning and Control, Vol. 14, No. 8, pp. 720-733, December, 2003 (IF=0.326)
-
"Agent-based fractal architecture and modelling for developing distributed manufacturing systems," with Kwangyeol Ryu, Int'l J. of Production Research, Vol. 41, No.17, pp. 4233-4255, November 20, 2003 (IF=0.557)
-
"Modeling and specifications of dynamic agents in fractal manufacturing systems," with Kwangyeol Ryu and Youngjun Son, Computers in Industry, Vol. 52, No. 2, pp. 161-182, October, 2003 (IF=0.692)
-
"Satisfaction assessment of multi-objective schedules using neural fuzzy methodology," with Y. Cha, Int'l J. of Production Research, Vol. 41, No. 8, pp. 1831-1849, May 20, 2003 (IF=0.557)
-
"Timing constraints??optimization of reserved tasks in the distributed shop-floor scheduling," with Sanghoon Lee, Int'l J. of Production Research, Vol. 41, No. 2, pp. 397-410, January 20, 2003 (IF=0.557)
-
"A conceptual framework for the generation of simulation models from process plans and resource configuration," with Sanghoon Lee and Hyunbo Cho, Int'l J. of Production Research, Vol. 38, No. 4, pp. 811-828, March 10, 2000
-
"A conceptual framework for the generation of simulation models from process plans and resource configuration," with Sanghoon Lee and Hyunbo Cho, Int'l J. of Production Research, Vol. 38, No. 4, pp. 811-828, March 10, 2000
-
"B-Spline Surface Approximation to Cross-Sections Using Distance Maps," with J. Jeoung, K. Kim, H. Park, and H. Cho, Int'l J. of Advanced Manufacturing Technology, Vol. 15, pp. 876-885, 1999
-
"Psychophysical methods and passenger preferences of interior designs," with S.H. Han, E.S. Jung, J. Kwahk, and S. Park, Applied Ergonomics, Vol. 29, No. 6, pp. 499-506, 1998
-
"Coach design for the Korean high-speed train: a systematic approach to passenger seat design and layout," with E.S. Jung, S.H. Han, and J. Choe, Applied Ergonomics, Vol. 29, No. 6, pp. 507-519, 1998
-
"Enabling Technologies of Agile Manufacturing and Its Related Activities in Korea," with H.B. Cho and M.H. Kim, Int'l J. of Computers & Industrial Engineering, Vol. 30, No. 3, pp. 323-334, 1996
-
"A CAD/CAPP Interface for Complex Rotationally Symmetric Parts," with K.H. Lee, Int'l J. of Production Research, Vol. 34, No. 1, pp. 227-252, 1996
-
"A Hybrid Type Active Vibration Isolation System Using Neural Networks," with K.G. Ahn, H.J. Pahk, and D.W. Cho, J. of Sound & Vibration, Vol. 192, No. 4, pp. 793-805, 1996
-
"Architectural Requirements for Rapid Development of Agile Manufacturing Systems," with M.K. Chung and H.B. Cho, Int'l J. of Computers & Industrial Engineering, Vol. 31, No. 3/4, pp. 551-554, 1996
-
"Flexible Process Sequencing using Petri Net Theory," with K.H. Lee, Int'l J. of Computers & Industrial Engineering, Vol. 28, No. 2, pp. 279-290, 1995
-
"On-line Monitoring of Tool Breakage in Face Milling using Self-organized Neural Network," with T.J. Ko and D.W. Cho, J. of Manufacturing Systems, Vol. 14, No. 2, pp. 80-90, 1995
-
"Integrated Precision Inspection System for Manufacturing of Moulds having CAD Defined Features," with H.J. Pahk, S.W. Hwang, Y.H. Kim, Y.S. Hong, and S.G. Kim, Int'l J. of Advanced Manufacturing Technology, Vol. 10, No. 3, pp. 198-207, 1995
-
"CAD-MAP and Estimation of ALV Positions in Mountainous Areas," with S.H. Suh, J.K. Kang, W.S. Jee, and K.S. Kim, ROBOTICA, Vol. 12, No. 4, pp. 287-298, 1994
-
"A Psychophysical Evaluation of Interior Design Alternatives for a High Speed Train,"with S.H. Han, E.S. Jung, J.Y. Kwak, S.J. Park, and J.H. Choe, , Int'l J. of Computers & Industrial Engineering, Vol. 27, No. 1/4, pp. 397-400, 1994
-
"Petri Net Application in Flexible Process Planning,"with K.H. Lee, Int'l J. of Computers & Industrial Engineering, Vol. 27, No. 1/4, pp. 505-508, 1994
-
"Conceptual Framework for Automated Process Planning,"with K.H. Lee, , Int'l J. of Computers & Industrial Engineering, Vol. 27, No. 1/4, pp. 115-118, 1994
-
"Numerical Optimization of a Queueing System by Dynamic Programming," with E. Stanley Lee, J. of Math. Anal. & Appl., Vol. 141, No. 1, pp. 84-93, 1989
-
"A Multi-Echelon and Multi-Indenture Repairable Item Queueing Model During Emergencies," with E. Stanley Lee, Int'l J. of Math. & Comp. Modeling, Vol. 12, No. 7, pp. 851-864, 1989
-
"Invariant Imbedding in Engineering Design," with E. Stanley Lee, J. of Math. Anal. & Appl., Vol. 119, No. 1/2, pp. 153-163, 1986
Domestic
- "Experimental and Numerical Study of Heating Characteristics of Discontinuos Carbon Fiber-Epoxy Composites," Myungsoo Kim, Kyungil Kong, Nari Kim, HyungWook Park, Ounyoung Park, Young-Bin Park, Mooyoung Jung, SangHwan Lee, SuGil Kim, Composite Research, Vol. 26, No. 1, pp. 1-6, 2013 (http://dx.doi.org/10.7234/kscm.2013.26.1.1)
- "The needs of students and practitioners on the education
curriculum of innovative product development," Lee, W.,
Jung, K., Jang, J., Jang, J., You, H., Chang, S. Y., Jung,
M., Han, S. H., and Jun, C., J. of Engineering Education
Research, Vol. 11, No. 4, pp. 11-18, 2008
- "Algorithm for the Dynamic Restructuring Process in the
Fractal Manufacturing System," with Jungtae Mun, Youngpil
Cha, and Moonsoo Shin, IE Interfaces, Vol.
17, Special Edition, pp. 46-51, December 2004
- "Development of Heterarchical SFCS Execution Module Using
E-Net," with Soondo Hong and Hyunbo Cho, J. of the
Korean Institute of Industrial Engineers (KIIE),
Vol. 25, No. 1, pp. 87-99, 1999
- "Development of ICPL for Heterarchical SFCS," with Sungpil
Kwon and Hyunbo Cho, J. of KIIE, Vol. 25,
No. 2, pp. 150-161, 1999
- "Assembly Sequence Determination from Design Data using
Voxelization," with Changho Lee and Hyunbo Cho, J.
of the Korean Society of Precision Engineering,
Vol. 13, No. 6, pp. 90-101, 1996
- "Development of a Prototype for Agile Manufacturing System
on Information Superhighway," with SoungRyong Yee, Hyunbo
Cho, and Gi-nam Wang, IE Interfaces, Vol.
9, No. 3, pp. 214-224, 1996
- "Development of A Planner of Processing Equipment for
Heterarchical SFCS," with HwaJin Kim and Hyunbo Cho, J.
of KIIE, Vol. 22, No. 4, pp. 719-739, 1996
- "FMS Control and Monitoring using Petri Net," with Go-Joong
Kim and Hyunbo Cho, J. of KIIE, Vol. 21, No.
1, pp. 137-151, 1995
- "Development of Operating Software for AS/RS including
Communication Protocol," with Kyung Joon Sohn, Hyun Yong
Lee, Joonyeob Song, IE Interfaces, Vol. 8,
No. 1, pp. 45-52, 1995
- "Evaluating Design Alternatives based on Magnitude Estimation,"
with S.H. Han, E.S. Jung, S. Park, J. Kwak, and P. Choe,
J. of the Ergonomics Society of Korea, Vol.
12, No. 2, pp. 3 - 13, 1993
- "A Part Recognition System for FMS based on Single Image
Data," with E.S. Kim, J. of KIIE, Vol. 19,
No. 4, pp. 23 - 40, 1993
- "Automatic Generation of Assembly Sequences," with K.J.
Sohn, J. of KIIE, Vol. 19, No. 1, pp. 1 -
17, 1993
- "Intelligent FMS Designer," with J. Hwang, IE Interfaces,
Vol. 5, No. 1, pp. 53-74, 1992
- "Guide-Path Design for Automated Guided Vehicles," with
H. Choi, J. of KIIE, Vol. 18, No. 1, pp. 121-139,
1992
- "FMS: Current Status and Prospect," with M. Lee,
Korean Management Science Review, Vol. 4,
pp. 12-41, 1987
|
|
|
Contents |
|
|
Book Chapters |
- "An Evaluation Fuzzy Model and Its Application for Knowledge-Based Social Network," Hyeongon Wi and Mooyoung Jung, Social Networks: A Framework of Computational Intelligence, Witold Pedrycz and Shy-Ming Chen Eds., pp. 313-332, Springer International Publishing Switzerland, 2014
- "Agent-based Manufacturing Systems Innovation: Fractal
Approaches," Jungtae Mun, Moonsoo Shin, Kwangyeol
Ryu, and Mooyoung Jung, Agent-based Computing, Duarte Bouca and
Amaro Gafagnao Eds., Chapter 7, pp. 155-193, Nova Science
Publishers, 2010
- "Fractal Approach to Managing Intelligent Enterprises,"
Kwangyeol Ryu and Mooyoung Jung, Creating Knowledge Based Organizations,
Gupta, Jatinder N.D. and Sharma, Sushil K., Eds., Chapter
XV, pp. 312-348, 2004
|
|
Contents |
|
|
Conference Proceedings |
- "Evaluating of Waiting Ratio to Develop Port Service Index for Domestic Ports," Kiyoul Lee, G.S. Kim, E.S. Kime, and Mooyoung Jung, Proceedings of the The 2015 IE/MS Joint
Spring Conference, pp. 111-115, Jeju, Korea, April 8-11, 2015
- "Monitoring Framework for Dynamic Inbound Flows," Kiyoul Lee, Hyunbo Cho, and Mooyoung Jung, Proceedings of the APIEMS 2014, pp. 1264-1269, Jeju, Korea, October 12-15, 2014
- "Period-based Delivery Scheduling Method for Inbound Logistics," Kiyoul Lee, Hyunbo Cho, and Mooyoung Jung, Proceedings of the The 2014 IE/MS Joint
Spring Conference, pp. 76-81, Busan, Korea, May 16-17, 2014
- "Global Booming and Development of Shale Oil," Suhong Kim, JeoungMin Lee, Seong-So Lee, Yu-Jin Choi, Kiyoul Lee, and Mooyoung Jung, Proceedings of the The 2014 IE/MS Joint
Spring Conference, pp. 927-930, Busan, Korea, May 16-17, 2014
- "Framework for Vehicle Routing Monitoring System in a Dynamic Inbound Logistics,"
Kiyoul Lee and Mooyoung Jung, Proceedings of The
2013 KIIE Fall Conference, pp. 309-313, Suwon, Korea, November 15, 2013
- "A Risk Model for Predicting Crude Oil Price,"
Jangbae Park, Suhong Kim, JungMin Lee, Kiyoul Lee, and Mootoung Jung, Proceedings of The
2013 KIIE Fall Conference, pp. 285-288, Suwon, Korea, November 15, 2013
- "Quantification of market external factors for Crude Oil Pricing," S. Pyo, J. Park, S. Kim, K. Lee, and M. Jung, Proceedings of the The 43rd Int'l Conf. on Computers
and Industrial Engineering (CIE 43), [132], pp. 1-8, Hong Kong, China, October 16-18, 2013
- "Simulation-based vehicle scheduling approach to real-time inbound supply chain control," with Kiyoul Lee, Proceedings of the The 17th Int'l Conf. on Industrial Engineering:Theory, Applications and Practice, MA4, pp. 547-553, Busan, Korea, October 6-9, 2013
- "Analysis of Qualitative Factors on Oil Pricing using Fuzzy Concept," with Sujin Pyo, Suhong Kim, Jangbae Park, and Kiyoul Lee, Proceedings of the The 2013 IE/MS Joint
Spring Conference, C7.3, pp. 925-930, Yeosu, Korea, May 24-25, 2013
- "Vehicle Scheduling for Inbound Supply Chain," with Kiyoul Lee, Proceedings of the The 2013 IE/MS Joint
Spring Conference, D10.3, pp. 1535-1540, Yeosu, Korea, May 24-25, 2013
- "Forecasting Spot Price of Crude Oil using Three-Agent Model," with Minsu Cho, Sujin Pyo, and Kiyoul Lee, Proceedings of the APIEMS 2012, pp. 1747-1753, Patong Beach, Phuket, Thailand, December 2-5, 2012 ("BEST
STUDENT PAPER" AWARD)
- "Job Packing-based Vehicle Routing Planning System for Inbound Supply Chain," with Kiyoul Lee, Proceedings of the APIEMS 2012, pp. 1635-1640, Patong Beach, Phuket, Thailand, December 2-5, 2012
- "Rule-based Vehicle Routing Planning System for Inbound Supply Chain,"
with Kiyoul Lee,Proceedings of The
2012 KIIE Fall Conference, AnSan, Korea, November 2, 2012
- "Interrelationship analysis between crude oil price and the world economic indices,"
with Sujin Pyo, Minsu Cho, and Kiyoul Lee,Proceedings of The
2012 KIIE Fall Conference, AnSan, Korea, November 2, 2012
- "Risk analysis of uncertainty in pricing of crude oil," with
Minsu Cho and Sujin Pyo, Proceedings of 1st Int'l Youth Conference <<Oil & Gas. APR-2012. Resources, Technologies, Cooperation>>, pp. 41-49, Vladivostok, Russia, May 29-30, 2012
- "Relationship analysis between oil price and equity returns of domestic industry using a regression model," with Kiyoul Lee, Minsu Cho, and Sujin Pyo, Proceedings of The 2012 IE/MS Joint
Spring Conference, E1.4, pp. 1-6, Gyeongju, Korea,
May 10-11, 2012
- "Risk analysis of oil pricing in crude oil trading,"
with Kiyoul Lee and Minsu Cho, Proceedings of The
2011 KIIE Fall Conference, Seoul, Korea, A6.2, pp.
1-5, November 5, 2011
- "Framework for vehicle routing planning system based
on the multi-pass simulation for inbound logistics in LCD
manufacturing, " with Kiyoul Lee and Hyunbo Cho, Proceedings
of APIEMS 2011, pp. 196-202, Beijing, China,
October 14-16, 2011
- "The Joint Effect of Vendor Managed Inventory (VMI)
and Transshipment for a Three-echelon System," with
Seungjin Oh, Kwangyeol Ryu, and Kiyoul Lee, Proceedings
of The 21st Int'l Conf. on Flexible Automation and
Intelligent Manufacturing (FAIM 2011), GS16, pp.
1-8, Taichung, Taiwan, June 26-29, 2011
- "Vehicle routing planning for inbound logistics based
on the multi-pass approach," with Kiyoul Lee and Hyunbo
Cho, Proceedings of The 2011 IE/MS Joint
Spring Conference, pp. 654-659, Incheon, Korea,
May 26-27, 2011
- "Production and procurement plans for the diversification
of supply network risks," with Seungjin Oh, Kwangyeol
Ryu, and Hyunbo Cho, Proceedings of The 1st Int'l
Conf. on Logistics and Maritime Systems(LOGMS),
Pusan, Korea, Sep. 15-17, 2010
- "A fractal echelon approach for inventory management
in supply chain networks," with Kwangyeol Ryu, Ilkyeong
Moon, and Seungjin Oh, Proceedings of The 16th Int'l
Symposium on Inventories(ISIR), Budapest, Hungary,
Aug. 23-27, 2010
- "Framework for evaluating robustness of a supply network
on the supply network risks," with Seungjin Oh and Kwangyeol
Ryu, Proceedings of The 40th Int'l Conf. on Computers
and Industrial Engineering (CIE 40), Awaji Island,
Japan, July 26-28, 2010
("BEST
STUDENT PAPER" AWARD)
- "Fractal approach to collaborative supply chain management,"
with Seungjin Oh, Kwangyeol Ryu, and Hyunbo Cho, Proceedings
of The 2010 IE/MS Joint Spring Conference,
D7.5, pp. 1-6, Jeju, Korea, June 3-4,
2010
- "Fractal Organization for Product Development in Robotics
Industry," with Seungjin Oh and Jungtae Mun, Proceedings
of The 6th CIRP-Sponsored Int'l Conf. on Digital Enterprise
Technology (DET 2009), pp. 197-209, Hong Kong, China,
December 14-16, 2009
- "Fractal-based Control and Monitoring System for Smart
Grid (FrCMSG)," with Kiyoul Lee, Proceedings of APIEMS
2009, pp. 2418-2424, Kitakyushu, Japan, December
14-16, 2009
- "Reconfigurable Supply Network Model: Validation through
a Simulation," with Seungjin Oh, Proceedings of APIEMS
2008, pp. 1363-1370, Nusa Dua, Bali, Indonesia,
December 3-5, 2008
- "Economic analysis for the photovoltaic system," with
Kiyoul Lee and Jungtae Mun, Proceedings of The 2008
KIIE Fall Conference, C7.3, pp. 1-5, Seoul, Korea,
November 7-8, 2008
- "Reconfiguration scenario model for flexible supply networks,"
with Seungjin Oh, Proceedings of The 2008 KIIE Fall
Conference, B8.3, pp. 1-5, Seoul, Korea, November
7-8, 2008
- "Risk management model in creating a virtual enterprise,"
with Kiyoul Lee and Jungtae Mun, Proceedings of The
2008 IE/MS Joint Spring Conference, A043, pp. 1-6,
Pohang, Korea, May 16-17, 2008
- "Reconfigurable supply network model in a dynamic market
environment," with Seoungjin Oh, Proceedings of The
2008 IE/MS Joint Spring Conference, D012, pp. 1-5,
Pohang, Korea, May 16-17, 2008
- "Project-based virtual organization creation with a goal-oriented
trust model," with Jungtae Mun, Proceedings of The
Asia Conf. on Intelligent Manufacturing & Logistics
Systems (IML 2008) , pp. 324-328, Kitakyushu, Japan,
February 25-27, 2008
("YOUNG SCIENTIST PRIZE" AWARD)
- "Reconfiguration of supply network structure in a dynamic
market environment," with Seungjin Oh and Moonsoo Shin,
Proceedings of The Asia Conf. on Intelligent Manufacturing
& Logistics Systems (IML 2008), pp. 6-10, Kitakyushu,
Japan, February 25-27, 2008
- "Self-reconfiguration mechanism for the fractal-based
supply chain structure," with Seungjin Oh, Proceedings of
APIEMS 2007, #577, pp. 1-8,
Kaohsiung, Taiwan, ROC, December 9-12, 2007
- "Market-based Negotiation Model for Employ-driven Distributed
Production Scheduling," with M. Shin and J. Mun, Proceedings
of The 2007 IEEE Int'l Conf. on Industrial
Engineering and Engineering Management(IEEM 2007), pp.
1083-1087, Singapore, December 3-5, 2007
- "Trust evaluation model for fractal-based virtual enterprises
using goal achievement probability," with J. Mun, M. Shin
and K. Lee, Proceedings of The 2007 IEEE Int'l
Conf. on Industrial Engineering and Engineering Management(IEEM
2007), pp. 1532-1536, Singapore, December 3-5, 2007
- "Dynamic restructuring process (DRP) for the fractal-based
SCM," with Seungjin Oh, Proceedings of The 2007 KIIE
Fall Conference, C9.2, pp. 1-6, Seoul, Korea, November
3, 2007
- "Evaluation of virtual enterprises utilizing trust models
for enterprises," with Jungtae Mun, Proceedings of
The 2007 KIIE Fall Conference, C6.2, pp. 1-5, Seoul,
Korea, November 3, 2007
- "Framework of fractal-based collaboration model for bio-industry,"
with Kiyoul Lee , Moonsoo Shin, and Jungtae Mun, Proceedings
of The 2007 KIIE Fall Conference, C6.1, pp.
1-5, Seoul, Korea, November 3, 2007
- "Knowledge evaluation model for project-oriented R&D
organizations and its application," with Hyeongon Wi, Seungjin
Oh, and Jungtae Mun, Proceedings of The 2007 KIIE
Fall Conference, B5.1, pp. 1-6, Seoul, Korea, November
3, 2007
- "Virtual enterprise network configuration: relation- and
opportunity-driven fractal organization models," with Jungtae
Mun, Proceedings of The 2007 IE/MS Joint Spring Conference,
SB3.3, pp. 813-818, Jinjoo, Korea, May 25-26, 2007
- "Coordination mechanism of goal for the fractal-based
SCM," with Seungjin Oh, Proceedings of The 2007 IE/MS
Joint Spring Conference, FB1.5, pp. 278-283, Jinjoo,
Korea, May 25-26, 2007
- "Knowledge-based selection model for human resources
in a project-oriented R&D organization," with Hyeongon
Wi, Seungjin Oh and Jungtae Mun, Proceedings of The
2007 IE/MS Joint Spring Conference, SB3.4, pp. 819-824,
Jinjoo, Korea, May 25-26, 2007
- "Self-evolution framework of manufacturing systems based
on fractal organization," with Moonsoo Shin , Proceedings
of The Int'l Conf. on Intelligent Manufacturing &
Logistics Systems (IML 2007), pp. 6-12, Kitakyushu,
Japan, February 26-28, 2007
- "Fractal enterprise: manufacturing enterprise collaboration
with trust evaluation," with Jungtae Mun, Proceedings of
The Int'l Conf. on Intelligent Manufacturing &
Logistics Systems (IML 2007), pp. 1-5, Kitakyushu,
Japan, February 26-28, 2007
- "Fractal goal model for the fractal-based SCM," with
and , Proceedings of APIEMS 2006,
pp. 423-429, Bangkok, Thailand , December 17-20, 2006
- "Profit sharing in supply chain management using the
fractal structure," with Seungjin Oh, Proceedings of
The 2006 KIIE Fall Conference, A4.6, pp. 1-5, Seoul,
Korea, November 4, 2006
- "Integration of databases for rice functional genomics
using agents," with Kiyoul Lee and Moonsoo Shin, Proceedings
of The 36th Int'l Conf. on Computers and Industrial
Engineering, pp. 2345-2353, Howard Plaza Hotel,
Taipei, Taiwan, June 20-23, 2006
- "Reassignment Based Vehicle Dispatching for a Semiconductor
FAB," with Byung-In Kim, , Jaejoon Shin, Junjae Chae, and
Sujeong Lee, Proceedings of The 2006 IE/MS Joint Spring
Conference, FB6.1, pp. 1-8, Daejeon, Korea, May
19-20, 2006
- "Goal model for the fractal-based SCM," with Seungjin
Oh and Youngpil Cha, Proceedings of The 2006 IE/MS
Joint Spring Conference, FA6.3, pp.1-5, Daejeon,
Korea, May 19-20, 2006
- "An agent-based integrated database for rice functional
genomics," with Kiyoul Lee, Moonsoo Shin, Suyoung An, Dong-Hoon
Jeong, and Gynheung An, Proceedings of The 2006 IE/MS
Joint Spring Conference, SA4.3, pp.1-5, Daejeon,
Korea, May 19-20, >2006
- "Fractal-based collaboration model for a virtual enterprise,"
with Jungtae Mun and Youngpil Cha, Proceedings of The
2006 IE/MS Joint Spring Conference, SA4.2, pp.1-4,
Daejeon, Korea, May 19-20, 2006
- "Goal regulation mechanism through reinforcement learning
in a fractal manufacturing system (FrMS)," with Moonsoo
Shin, Proceedings of The 2006 IE/MS Joint Spring Conference,
FB7.6, pp. 1-5, Daejeon, Korea, May 19-20, 2006
- "Fractal Manufacturing System (FrMS) based on Autonomous
and Intelligent Resource Model(AIR-model)," with Moonsoo
Shin, Proceedings of The 2006 IE/MS Joint Spring Conference,
FA11.5, pp.1-6, Daejeon, Korea, May 19-20, 2006
- "Application of Coordination Policies for Fuzzy Newsvendor
Model," with Kwangyeol Ryu, Youngpil Cha, Seokwoo Lee, and
Honzong Choi, Proceedings of The 2006 IE/MS Joint
Spring Conference, FA6.6, pp.1-6, Daejeon, Korea,
May 19-20, 2006
- "Benchmarking analysis of product design and development
programs of domestic and foreign universities," with Jungtae
Mun, Kihyo Jung, Yoontaek Han, Heechun You, Soo Y. Chang,
and Chi-Hyuck Jun, Proceedings of The 2006 IE/MS Joint
Spring Conference, FA7.3, pp.1-5, Daejeon, Korea,
May 19-20, 2006
- "Restructuring methodology for control structure of the
fractal manufacturing system," with Jungtae Mun and Moonsoo
Shin, Proceedings of APIEMS 2005,
1308, pp. 1-8, Manila, Philippines, December 4-7, 2005
- "Fractal control system for distributed AGVs," with Seungjin
Oh and Youngpil Cha, Proceedings of APIEMS 2005,
1309, pp. 1-9, Manila, Philippines, December 4-7, 2005
- "Agent-based control system for distributed control of
AGVs," with Seungjin Oh, Proceedings of The 2005 IE/MS
Joint Spring Conference, SB9.4, pp. 1117-1123, Cheongju,
Korea, 2005
- " Plan-coordination methodology for Multi-agent in the
Fractal Manufacturing System (FrMS)," with Youngpil Cha,
Proceedings of The 2005 IE/MS Joint Spring Conference,
SB9.5, pp. 1124-1128, Cheongju, Korea, 2005
- "An Architecture for the Fractal Generation and Evolution
Process in the Fractal Manufacturing System," with Jungtae
Mun and Moonsoo Shin, Proceedings of APIEMS
2004, pp. 3.2.1-3.2.10, Gold Coast, Australia,
December 12-15, 2004
- "Ontology-based Information Architecture for RISD," with
Seunghee Lee, Moonsoo Shin, Joowon Kim, Dong-Hoon Jeong,
Suyoung An, and Gynheung An, Proceedings of
APIEMS 2004, pp. 17.13.1-17.13.10, Gold Coast,
Australia, December 12-15, 2004
- "An Algorithm for the Dynamic Restructuring Process in
the Fractal Manufacturing System(FrMS)," with Jungtae Mun,
Youngpil Cha, and Moonsoo Shin, Proceedings of The
2004 KIIE Fall Conference, A-7.2, pp. 1-6, Seoul,
Korea, November 13, 2004
- "An Agent-based Knowledge Extraction System for the Rice
Genome Database," with Joo-Won Kim, Moonsoo Shin, Dong-Hoon
Jeong, Suyoung An, and Gynheung An, Proceedings of The
2004 KIIE Fall Conference, A-7.4, pp. 1-6, Seoul,
Korea, November 13, 2004
- "Conflict Detection and Resolution for Distributed Control
of AGVs based on Agent Technology," with Seungjin Oh and
Youngpil Cha, Proceedings of The 2004 KIIE Fall Conference,
A-7.1, pp. 1-8, Seoul, Korea, November 13, 2004
- "Fuzzy Decision Making for Agent Coordination in the
Fractal Manufacturing System (FrMS)," with Youngpil Cha,
Proceedings of The Int'l Conf. on Cybernetics
and Information Technologies, Systems and Applications:
CITSA 2004, Vol. III, pp. 1-6, Orlando, Florida,
USA, July 21-25, 2004
- "Modeling and Implementation of a Fractal Template for
Fractal Manufacturing System(FrMS)," with Jungtae Mun, The
2004 IE/MS Joint Spring Conference, SA5, pp. 9-12,
JeonJu, Korea, 2004
- "Framework of MANPro-based Control for Intelligent Manufacturing
Systems," with Moonsoo Shin, The 2004 IE/MS Joint
Spring Conference, SA5, pp. 5-8, JeonJu, Korea,
2004
- "Dynamic Reconfigurability in the Fractal-based Supply
Chain Management (fSCM )," with Kwangyeol Ryu,
Seokwoo Lee, and Honzong Choi, The 2004 IE/MS Joint
Spring Conference, SA4, pp. 14-17, JeonJu, Korea,
2004
- "Intelligent Allocation of Transporting Resources in
Logistics using Genetic Algorithm," with Joo-Won Kim and
Youngpil Cha, Proceedings of The 2004 IE/MS Joint
Spring Conference, FA3, pp. 5-8, JeonJu, Korea,
2004
- "Real-time Simulator for Facilitating Dynamic Restructuring
Process in FrMS," with Kwangyeol Ryu and Honzong Choi, Proceedings
of The 33rd Int'l Conf. on Computers and Industrial
Engineering, F1.8, CIE#535, pp. 1-6, Ramada Plaza
Hotel, Jeju, Korea, March 25-27, 2004
- "Resolution Scheme for Conflicts Between Agents in Fractal
Manufacturing Systems," with Youngpil Cha, Proceedings of
The 33rd Int'l Conf. on Computers and Industrial Engineering,
F4.10, CIE#551, pp. 1-6, Ramada Plaza Hotel, Jeju,
Korea, March 25-27, 2004
- "Ontology-based Information Architecture for MANPro-based
System Control," with Moonsoo Shin, Proceedings of The
33rd Int'l Conf. on Computers and Industrial Engineering,
T3.2, CIE#491, pp. 1-6, Ramada Plaza Hotel, Jeju,
Korea, March 25-27, 2004
- "An Agent-based Knowledge Management System for RISD,"
with Seunghee Lee, Moonsoo Shin, Jungtae Mun, Dong-Hoon
Jeong, Suyoung An, and Gynheung An, Proceedings of The
33rd Int'l Conf. on Computers and Industrial Engineering,
S1.5, CIE#133, pp. 1-6, Ramada Plaza Hotel, Jeju,
Korea, March 25-27, 2004
- "Self-reconfigurable Software Architecture: Design and
Implementation," with Jungtae Mun and Kwangyeol Ryu, Proceedings
of The 33rd Int'l Conf. on Computers and Industrial
Engineering, T4.2, CIE#569, pp. 1-6, Ramada Plaza
Hotel, Jeju, Korea, March 25-27, 2004
- "Conflict resolution via negotiation among agents for
goal formation in the fractal manufacturing system," with
Moonsoo Shin, Youngpil Cha, and Kwangyeol Ryu, Proceedings
ofThe 8th Annual Int'l Conf. on Industrial Engineering
Theory, Applications and Practice, pp. 1034-1039,
Las Vegas, Nevada, USA, November 10-12, 2003
- "Dynamic Restructuring Process in the Fractal Manufacturing
System," with Kwangyeol Ryu, Proceedings of The 2003
KIIE Fall Conference, pp. 54-58, Pyoung Chang, Korea,
September 26-27, 2003
- "Goal-formation Process in Fractal Manufacturing Systems,"
with Kwangyeol Ryu, Proceedings of The 2003 IE/MS
Joint Spring Conference, pp. 800-807, Pohang, Korea,
May 16-17, 2003 ("JUNG-HEUN
BEST STUDENT PAPER" AWARD)
- "Agent-based Collaborative Simulation Architecture for
Distributed Manufacturing Systems," with Youngpil Cha, Proceedings
of The 2003 IE/MS Joint Spring Conference,
pp. 808-813, Pohang, Korea, , May 16-17, 2003
- "Knowledge Representation and Extraction of Biological
Data Using RDFS+OWL," with Seunghee Lee and Moonsoo Shin,
Proceedings of The 2003 IE/MS Joint Spring Conference,
pp. 1136-1141, Pohang, Korea, May 16-17, 2003
- "Negotiation Mechanism for Scheduling in the Agent-based
Fractal Manufacturing System," with Kwangyeol Ryu, Proceedings
of The Fourth Asian Pacific Conf. on Industrial Engineering
and Management Systems (APIEMS 2002), pp. 329-332,
Taipei, Taiwan, December 18-20, 2002
- "Fractal-based Supply Chain Management," with Kwangyeol
Ryu and Youngjun Son, Proceedings of The 7th Int'l
Conf. on Industrial Engineering Theory, Applications and
Practice, pp. 506-509, Busan, Korea, October 24-26,
2002
- "Information modeling in the Mobile Agent-based Negotiation
Using DAML+OIL," with Moonsoo Shin and Kwangyeol Ryu, Proceedings
of The 2002 KIIE Fall Conference, pp. 369-372,
Suwon, Korea, October 12, 2002
- "Communication Architecture in the XML Compatible Agent-based
Distributed Control System," with Youngpil Cha, Proceedings
of The 2002 KIIE Fall Conference, pp. 373-377,
Suwon, Korea, October 12, 2002
- "Data modeling using DAML+OIL for integrated bioinformatics
information systems," with Jonghwan Shin, Proceedings of
The 2002 KIIE Fall Conference, pp. 619-623,
Suwon, Korea, October 12, 2002
- "Development of a Framework for Simulation of Organic
Reactions," with Seunghee Lee, Seunghak Lee, and Kwangyeol
Ryu, Proceedings of The 2002 KIIE Fall Conference,
pp. 624-628, Suwon , Korea, October 12, 2002
- "Modeling of Information Architecture Using XML in the
Agent-based Distributed Control System," with Youngpil Cha,
Moonsoo Shin, and Kwangsoo Kim, Proceedings of The
6th Int'l Conference on Engineering Design and Automation
(EDA 2002), pp. 178-183, Maui, Hawaii, USA, August
4-7, 2002
- "Integrated Framework for Bioinformatics using XML-based
Information Technology," with Jonghwan Shin, Proceedings
of The 30th Int'l Conf. on Computers & Industrial
Engineering, Vol. 2, pp. 803-808, Tinos Island,
Greece, June 28-July 2, 2002
- "Mobile Agent-based Bid Generation Scheme for Real-time
Scheduling," with Moonsoo Shin, Proceedings of The
30th Int'l Conf. on Computers & Industrial Engineering,
Vol. 2, pp. 809-814, Tinos Island, Greece, June 28-July
2, 2002
- "Dynamic modeling of fractal-specific characteristics
in fractal manufacturing systems," with Kwangyeol Ryu, Proceedings
of The 35th CIRP Int'l Seminar on Manufacturing Systems,
pp. 444-450, Seoul, Korea, May 13-15, 2002
- "XML-based Bio-Informatic Systems," with JongHwan Shin,
Proceedings of The 2002 IE/MS Joint Spring Conference,
pp. 301-305, Daejeon, Korea, May 3-4, 2002
- "A Two-phase Heuristic Algorithm for Multiple Sequence
Alignment of Nucleotide and Amino Acid," with Jonghwan Shin
and Kwangyeol Ryu, Proceedings of The 2001 KIIE Fall
Conference, pp. 507-510, YongIn, Korea, November
3, 2001
- "Information Architecture in the Agent-based Distributed
Control System for Machining Process," with Youngpil Cha
and Hyungjun Kim, Proceedings of The 2001 KIIE Fall
Conference, pp. 745-748, YongIn, Korea, November
3, 2001
- "A Study on the Bidding Scheme for Mobile Agent-based
Negotiation," with Moonsoo Shin and Kwangyeol Ryu, Proceedings
of The 2001 KIIE Fall Conference, pp. 749-752,
YongIn, Korea, November 3, 2001
- "Modeling of Components in the Fractal Manufacturing
System using UML," with Kwangyeol Ryu, Proceedings of The
2001 KIIE Fall Conference, pp. 753-756, YongIn,
Korea, November 3, 2001
- "A Novel Negotiation Protocol for Agent-based Control
Architecture, " with Moonsoo Shin and Kwangyeol Ryu, Proceedings
of The 5th Int'l Conf. on Engineering Design and Automation(EDA
2001), pp. 700-705, Las Vegas, Nevada, U.S.A., August
5-8, 2001
- "A Methodology for Implementing Agent-based Controllers
In the Fractal Manufacturing System," with Kwangyeol Ryu
and Moonsoo Shin, Proceedings of The 5th Int'l Conf.
on Engineering Design and Automation (EDA 2001),
pp. 91-96, Las Vegas, Nevada, U.S.A., August 5-8, 2001
- "Satisfaction assessment of production schedules using
Extended TOPSIS," with Youngpil Cha and Sungbong Cho, Proceedings
of The 16th Int'l Conf. on Production Research (ICPR-16),
Paper # 0217, pp. 1-7, Prague, Czech Republic, July 30-August
3, 2001
- "Satisfaction Assessment of Production Schedules Using
Extended TOPSIS," with Youngpil Cha, Proceedings of The
2001 IE/MS Joint Spring Conference, pp. 556-559,
YangYang, Korea, April 27-28, 2001
- "A Negotiation for Agent-based Control Architecture,
" with Moonsoo Shin and Kwangyeol Ryu, Proceedings of The
2001 IE/MS Joint Spring Conference, pp. 552-555,
YangYang, Korea, April 27-28, 2001
- "Implementing Intelligent Controllers of Fractal Manufacturing
Systems," with Kwangyeol Ryu, Proceedings of The 2001
IE/MS Joint Spring Conference, pp. 548-551, YangYang,
Korea, April 27-28, 2001
- "A Fractal Company for Knowledge Management In an Internet
Environment," with Sungbong Cho and Kwangyeol Ryu, Proceedings
of The 2001 IE/MS Joint Spring Conference,
pp. 363-366, YangYang, Korea, April 27-28, 2001
- "A Study of Serial Communication Load on PC-based Equipment
Controllers," with Kwangyeol Ryu, Proceedings of The
2000 IE/MS Joint Spring Conference, pp. 36-39, Masan,
Korea, April 21-22, 2000
- "Integrated Planning and Scheduling Framework for Dynamic
Shop Floor in Distributed Control Architecture," with Sanghoon
Lee and Kwangsoo Kim, Proceedings of The 2000 Special
Int'l Conference on Production Research (ICPR-2000),WB2,
pp.1-6, Bangkok, Thailand, August 2-4, 2000
- "Timing Constraints Optimization for Reserved Tasks in
Agent-based Distributed Shop Floor Scheduling," with Sanghoon
Lee, Proceedings of The 27th Int'l Conf. on Computers
& Industrial Engineering, Paper #57, pp. 1-5,
Beijing, China, October 11-13, 2000
- "Collision avoidance of multiple AGVs using neural network
and agent technology in a TFT-LCD plant," with Sungbong
Cho and Kwangyeol Ryu, Proceedings of The 2000 KIIE
Fall Conference, A06.3, pp. 1-4, Seoul, Korea, November
4, 2000
- "Agent-based control architecture for material transport
system in a TFT-LCD plant," with and Kwangyeol Ryu, Proceedings
of The 2000 KIIE Fall Conference, B06.4, pp.
1-4, Seoul, Korea, November 4, 2000
- "Intelligent Control Architecture for Fractal Manufacturing
System," with Kwangyeol Ryu, , and Kwangsoo Kim, Proceedings
of The 3rd Asia-Pacific Conf. on Industrial Engineering
and Management Systems (APIEMS'2000), pp. 594-598,
Hong Kong, December 20-22, 2000
- "Feature-Based Semi-Automatic Process Planning for Discrete
Part Manufacturing," with P. Jang, K. Song, J. Joo, and
H. Cho, Proceedings of The 3rd Int'l Conf. on Engineering
Design and Automation (EDA '99), pp. 58-65, Vancouver,
BC, Canada, August 1-4, 1999
- "Design of Fault-tolerant Controller in Distributed Shop
Floor Control Systems," with Sanghoon Lee and H. Cho, Proceedings
of The 3rd Int'l Conf. on Engineering Design and Automation
(EDA '99), pp. 433-439, Vancouver, BC, Canada, August
1-4, 1999
- "3D part packing: a genetic algorithm based approach,"
with , Proceedings of The 1999 KIIE Fall Conference,
pp. 49-52, Seoul, Korea, October 30, 1999
- "Component Design and Modeling for Fractal Manufacturing
Systems," with Kwangyeol Ryu and Sanghoon Lee, Proceedings
of 1999 KIIE Fall Conference, pp. 472-475,
Seoul, Korea, October 30, 1999
- "EXPRES: An Event Driven Dynamic Scheduling," with Duckyoung
Kim, Proceedings of The 1999 KIIE Fall Conference,
pp. 1109-1112, Seoul, Korea, October 30, 1999
- "Dynamic Scheduling Scheme for Distributed Shop Floor
in Heterarchical Control Architecture," with Sanghoon Lee
and Hyunbo Cho, Proceedings of The 26th Int'l Conf.
on Computers & Industrial Engineering, Vol.
1, pp. 14-19, Melbourne, Australia, December 15-17, 1999
- "Coordination Mechanisms for Distributed Manufacturing
Systems in Heterarchical Control Architecture," with Hyunbo
Cho, Kwangsoo Kim, and Sanghoon Lee, Proceedings of The
26th Int'l Conf. on Computers & Industrial Engineering,
Vol. 1, pp. 174-179, Melbourne, Australia, December 15-17,
1999
- "A Process and Resource Models-based Intelligent Simulator
for FMS Control," with Pyoungyol Jang and Hyunbo Cho, Proceedings(CD)
of The 1998 IE/MS Joint Spring Conference,
A 06.4, pp.1-5, Pusan, Korea, April 24-25, 1998
- "Decision-Making Procedures for Feature-based Holonic
Control of CNC Machine," with Junho Shin and Hyunbo Cho,
Proceedings(CD) of The 2nd Int'l Conf. on Engineering
Design and Automation (EDA '98), MS# 287, pp. 1-4,
Maui, Hawaii, USA, August 9-12, 1998
- "Framework for Distributed Problem Solving in Heterarchical
SFCS," with Sanghoon Lee and Hyunbo Cho, Proceedings(CD)
of The 2nd Int'l Conf. on Engineering Design and Automation
(EDA '98), MS# 288, pp. 1-4, Maui, Hawaii, USA,
August 9-12, 1998
- "Petri Net-based Scheduling and Control Scheme for Equipment
Control Agent in Heterarchical Manufacturing Architecture,"
with Sanghoon Lee and Hyunbo Cho, Proceedings of The
1998 KIIE Fall Conference, pp. 653-657, Seoul, Korea,
Oct. 17, 1998 ("JUNG-HEUN
BEST STUDENT PAPER" AWARD)
- "Information Architecture for Heterarchical SFCS," with
Hyungjun Kim and Hyunbo Cho, Proceedings of The 1998
KIIE Fall Conference, pp. 253-257, Seoul, Korea,
Oct. 17, 1998
- "Development of Distribution Architecture for CIM Systems,"
with Kwang-yeol Ryu and Hyunbo Cho, Proceedings of
The 1998 KIIE Fall Conference, pp. 235-240, Seoul,
Korea, Oct. 17, 1998
- "Extended Production Reservation Scheme in Cooperative
Problem Solving," with Duckyoung Kim and Hyunbo Cho, Proceedings
of The 1998 KIIE Fall Conference, pp. 663-667,
Seoul, Korea, Oct. 17, 1998
- "Scheduler for Processing Equipment in Heterarchical
SFCS," with Hyunbo Cho and Soohyun Cha, Proceedings of The
22nd Int'l Conference on Computers & Industrial Engineering,
pp. 160-163, Cairo, Egypt, Dec. 20-22, 1997
- "Planner for Processing equipment in Heterarchical Architecture,"
with Hyunbo Cho and Hwajin Kim, Proceedings of The
1st Int'l Conf. on Engineering Design and Automation(EDA
'97), pp. 651-654, Bangkok, Thailand, March 18-21,
1997
- "Development of Agile Manufacturing System using Information
Superhighway," with Sungpil Kwon, Soondo Hong, Sanghoon
Lee, Hyunbo Cho, Gi-Nam Wang, and Soungryong Yee, Proceedings
of 1996 KIIE Fall Conference, pp. 356-359,
Seoul, Korea, Nov. 9, 1996
- "Manufacturing Process and Resource Models for Simulation
Modeling," with Daesong Kim and Hyunbo Cho, Proceedings
of 1996 KIIE Fall Conference, pp. 463-466,
Seoul, Korea, Nov. 9, 1996
- "Automatic Generation of Simulation Model in an Object-oriented
Paradigm," with Sanghoon Lee and Hyunbo Cho, Proceedings
of 1996 KIIE Fall Conference, pp. 467-470,
Seoul, Korea, Nov. 9, 1996
- "Real-time Shop Floor Control under Heterarchical Architecture,"
with Sanghoon Lee and Hyunbo Cho, Proceedings of Pacific
Conference on Manufacturing '96, Vol. 1, pp. 372-376,
Seoul, Korea, Oct. 29-31, 1996
- "Automatic Generation of Simulation Model for Shop Floor
Control," with Sanghoon Lee and Hyunbo Cho, Proceedings
of 20th Int'l Conference on Computers & Industrial
Engineering, Vol. 2, pp. 1227-1230, Kyongju, Korea,
Oct. 6-9, 1996
- "Coach Design for the Korean Highspeed Train: A Systematic
Approach to Passenger Seat Design and Layout," with E.S.
Jung, S.H. Han, and J. Choe, Proceedings of ICAE '96
(1st Int'l Conference on Applied Ergonomics), 576-579,
Istanbul, Turkey, May 21-24, 1996
- "Manufacturing Process Modeling for Automatic Generation
of Simulation Code," with Daesong Kim and Hyunbo Cho, Proceedings
of 1996 IE/MS Joint Spring Conference, pp.
627-630, Chungju, Korea, April 26-27, 1996
- "Automatic Generation of Simulation Model for Production
Control System," with Sanghoon Lee and Hyunbo Cho, Proceedings
of 1996 IE/MS Joint Spring Conference, pp.
631-634, Chungju, Korea, April 26-27, 1996
- "Agile Manufacturing-Architectural Requirements and Shop
Floor Control Systems," with H.B. Cho, Proceedings of 1995
Joint Australia-Korea Workshop on Manufacturing Technology,
33-44, Univ. of Wollongong, Wollongong, New South Wales,
Australia, Nov. 20-21, 1995
- "Architectural Requirements for Rapid Development of
Agile Manufacturing Systems," with M.K. Chung and H.B. Cho,
Proceedings of 18th Int'l Conference on Computers
& Industrial Engineering, Vol. I, 37-40, Shanghai,
China, Oct. 25-27, 1995
- "Component-based Control for Flexible Assembly Systems,"
with K.J. Sohn and H. B. Cho, Proceedings of 18th
Int'l Conference on Computers & Industrial Engineering,
Vol. I, 213-216, Shanghai, China, Oct. 25-27, 1995
- "Execution Models for Shop Floor Control Using Petri-Nets,"
with H.B. Cho, Proceedings of 18th Int'l Conference
on Computers & Industrial Engineering, Vol.
I, 371-375, Shanghai, China,
- "An Intelligent Planner of Processing Equipment for CSCW-based
Shop Floor Control in Agile Manufacturing," with Hwajin
Kim and Hyunbo Cho, Proceedings of 1995 IE/MS Joint
Spring Conference, Vol. I, pp. 185-192, Kwangju,
Korea, April 28-29, 1995
- "A Petri Net Based Execution Model of Processing Equipment
for CSCW-based Shop Floor Control in Agile Manufacturing,"
with Soondo Hong and Hyunbo Cho, Proceedings of 1995
IE/MS Spring Joint Conference, Vol. I, pp. 193-200,
Kwangju, Korea, April 28-29, 1995
- "Assembly System Control under CSCW-based Shop Floor Control,"
with Kyungjoon Sohn and Hyunbo Cho, Proceedings of 1995
IE/MS Joint Spring Conference, Vol. I, pp. 201-207,
Kwangju, Korea, April 28-29, 1995
- "Identification of Scheduling Problem for CSCW-based
Shop Floor Control in Agile Manufacturing," with Soohyun
Cha and Hyunbo Cho, Proceedings of 1995 IE/MS Joint
Spring Conference, Vol. I, pp. 208-215, Kwangju,
Korea, April 28-29, 1995
- "A Scheme To Represent Assembly Status Information for
Assembly Sequence Determination," with Changho Lee and Hyunbo
Cho, Proceedings of 1995 IE/MS Joint Spring Conference,
Vol. II, pp. 635-642, Kwangju, Korea, April 28-29, 1995
- "Conceptual Framework for Automated Process Planning,"
with K.H. Lee, Proceedings of 16th Int'l Conference
on Computers & Industrial Engineering, pp. 309-312,
Ashikaga, Japan, March 7-9, 1994
- "A Psychophysical Evaluation of Interior Design Alternatives
for a High Speed Train," with S.H. Han, E.S. Jung, J.Y.
Kwak, S.J. Park, and J.H. Choe, Proceedings of 16th
Int'l Conference on Computers & Industrial Engineering,
pp. 865-868, Ashikaga, Japan, March 7-9, 1994
- "Petri Net Application in Flexible Process Planning,"
with K.H. Lee, Proceedings of 16th Int'l Conference
on Computers & Industrial Engineering, pp. 877-880,
Ashikaga, Japan, March 7-9, 1994
- "FEM Analysis for Safety Evaluation and Design of the
Baseball Helmet," with K.I. Choi and M.K. Chung, Proceedings
of 1994 KIIE Fall Conference, pp. 458-465,
Suwon, Korea, Oct. 1994
- "Assembly Sequence Generation Using Voxelization," with
C.H. Lee, Proceedings of 1994 KIIE Fall Conference,
pp. 519-524, Suwon, Korea, Oct. 1994
- "Object-Oriented Database Design for Manufacturing Resources,"
with Y.Y. Lee, Proceedings of 1994 KIIE Fall Conference,
pp. 525-530, Suwon, Korea, Oct. 1994
- "Development of a Communication Simulator for AS/RS,"
with S.D. Hong, K.J. Sohn, H.Y. Lee, J.Y. Song, and K.C.
Kim, Proceedings of 1994 KIIE Fall Conference,
pp. 531-537, Suwon, Korea, Oct. 1994
- "Estimating ALV Position in Mountainous Area," with S.H.
Suh, J.K. Kang, W.S. Jee, and K.S. Kim, Proceedings of 1993
IEEE/RSJ Int'l Conference on Intelligent Robots & Systems,
Vol. 3, 2178-2185, Yokohama, Japan, July 26-30, 1993
- "Development of a Flexible Manufacturing Cell Controller,"
with K.H. Lee and K.J. Sohn, Proceedings of 2nd Int'l
Symposium on Intelligent Automation in Process Industries,
pp. 305-316, Kjoungju, Korea, Feb. 12-13, 1993
- "Modeling and Control of an FMS using Petri Net," with
G.J. Kim and K.H. Lee, Proceedings of 1993 KIIE Fall
Conference, pp. 441-448, Seoul, Korea, Oct. 1993
- "Assembly Sequence Generation Considering Interference
Direction," with K.J. Son, Proceedings of 1993 KIIE
Fall Conference, pp. 4-11, Seoul, Korea, Oct. 1993
- "A Conceptual Framework for Automatic Process Planning,"
with K.H. Lee, Proceedings of 1993 KIIE Fall Conference,
pp. 27-34, Seoul, Korea, Oct. 1993
- "Parametric Design for Mechanical Structure Using Knowledge-based
System," with C.H. Lee, B.I. Kim, and K.S. Kim, Proceedings
of 1993 Korean Automatic Control Conference,
Vol. 1, pp. 1018-1023, Seoul, Korea, Oct. 1993
- "Automatic Generation of BOM Using Knowledge-based System,"
with Y.Y. Do, S.Y. Chang, I.J. Choi, and C.Y. Park, Proceedings
of 1993 Korean Automatic Control Conference,
Vol. 1, pp. 970-974, Seoul, Korea, Oct. 1993
- "Development of Error Compensation System for Commercial
CMMs," with H.J. Pahk, and J.H. Kim, Proceedings of
1993 KSME Fall Conference, Vol. 1, pp. 476-480,
Seoul, Korea, Oct. 1993
- "Computer Aided Error Measurement System for Roll, Vertical
and Horizontal Straightness Errors of Machine Tools and
Multi-axis Mechanism using Photo Pin Diode," with H.J. Pahk,
S.W. Whang, and J.H. Kim, Proceedings of 1993 KSME
Fall Conference, Vol. 1, pp. 481-486, Seoul, Korea,
Oct. 1993
- "An Ergonomic Design and Layout of a Passenger Seat for
the Korean High Speed Rail," with E.S. Jung and S.H. Han,
Proceedings of Symposium on High Speed Rail,
pp. 369-399, Seoul, Korea, Oct. 22, 1993
- "Development of Computer Aided Error Measurement System
for Linear Motion Table," with S.W. Hwang and H.J. Pahk,
Proceedings of 1993 KSPE Fall Conference,
pp. 43-46, Seoul, Korea, Nov. 1993
- "Development of CAD-directed inspection system for product
having sculptured surface," with Y.H. Kim and H.J. Pahk,
Proceedings of 1993 KSPE Fall Conference,
pp. 330-334, Seoul, Korea, Nov. 1993
- "Automatic Feature Recognition for Rotational Parts,"
with K.H. Lee, Proceedings of 1992 Korean Automatic
Control Conference, Vol. 1, pp. 896-900, Seoul,
Korea, Oct. 1992
- "A Study on Feature Extraction for the Part Recognition
System of FMC," with E.S. Kim, Proceedings of 1992
Korean Automatic Control Conference, Vol. 1, pp.
892-895, Seoul, Korea, Oct. 1992
- "Computer Aided Tolerance Assignment System for CAPP,"
with G.J. Kim, Proceedings of 1992 Korean Automatic
Control Conference, Vol. 1, pp. 901-905, Seoul,
Korea, Oct. 1992
- "Assembly Feature Extraction and Coding for Automated
Assembly," with K.J. Sohn and M.Y. Jung, Proceedings of
1992 KIIE Fall Conference, pp. 235-243, Seoul,
Korea, Oct. 1992
- "Determination of Assembly Sequences using Neural Network,"
with K.J. Sohn, Proceedings of 1991 KIIE Fall Conference,
pp. 199-209, Seoul, Korea, Oct. 1991
- "Real-Time Control and Monitoring of an AS/RS for CIM,"
with K.J. Sohn, K.I. Oh, and H.Y. Lee, Proceedings of 1991
Korean Automatic Control Conference, Vol. 1, pp.
826-831, Seoul, Korea, Oct. 1991
- "Development of FMC Control Software for CIM," with K.H.
Lee, E.S. Kim, S.H. Suh, and B.C. Ko, Proceedings of 1991
Korean Automatic Control Conference, Vol. 1, pp.
821-825, Seoul, Korea, Oct. 1991
- "Rule-based Approach for the Design of AGV Path in CIMS,"
with H.W. Choi, Proceedings of 1991 Korean Automatic
Control Conference, Vol. 1, pp. 793-798, Seoul,
Korea, Oct. 1991
|
|
Contents |
|
|
Invited Talks & Presentations |
- "Challenges for Top-level School of Science &
Technology: Strategy with Focused Academic Programs,"
Plenary talk at APIEMS 2011, Beijing, China,
October 14-16, 2011
- "Fractal Approach to Manufacturing Systems (based on
FrMS for Virtual Organization)," Proceedings of AKC-2008,
IMR-2a, Tokyo, Japan, October 23-25,
2008
- "Manufacturing Systems and Agents (based on Fractal Manufacturing
Systems)," Tutorial talk at The Asia Conf. on Intelligent
Manufacturing & Logistics Systems (IML 2008),
Kitakyushu, Japan, February 25-27,
2008
- "Control of powdery mildew on squash with nano-silver
liquid NANOVERTM in the greenhouse," with Sang-Woo
Kim, Ji-Seon Min, Young-Jae Kim, Youn-Su Lee, andSeung-Bin
Kim, Abstracts of Presentations at the 2007 Annual
Spring Meeting of the Korean Society of Plant Pathology,
The Plant Pathology Journal, Volume 23, No., 4,
pp. 336, December 2007
- "Comparison of inhibition effects of nano-silver liquid
(NANOVERTM) against powdery mildews on cucumber
grown in different cultivation conditions," with Sang-Woo
Kim, Ji-Seon Min, Young-Jae Kim, Youn-Su Lee, andSeung-Bin
Kim, Abstracts of Presentations at the 2007 Annual
Spring Meeting of the Korean Society of Plant Pathology,
The Plant Pathology Journal, Volume 23, No., 4, pp.
331, December 2007
- "Studies on the control effect of nano-silver liquid (NANOVERTM)
against white rot of spring green onion," with Ji-Seon Min,
Sang-Woo Kim, Young-Jae Kim, Youn-Su Lee, andSeung-Bin Kim,
Abstracts of Presentations at the 2007 Annual Spring
Meeting of the Korean Society of Plant Pathology, The Plant
Pathology Journal, Volume 23, No., 4,
pp. 338, December 2007
- "Inhibitory effect of nano-silver NANOVERTM,
against the Raffaelea sp.," with Sang-Woo Kim, Ji-Sun
Min, Youn-Su Lee, andSeung-Bin Kim, Abstracts of Presentations
at the 2007 Meeting of the Korean Society of Plant
Pathology, The Plant Pathology Journal,
Volume 23, No., 2, pp. 121, June 2007
- "Effects of Various NANOVERTM Liquid on the
Fungal Growth in vitro," with S.W. Kim, J.S. Min,
Y.S. Lee, S.B. Kim, M.S. Yu, D.J. Kim, and H.R. Youn, Abstracts
of Presentations at the 2007 Meeting of the Korean
Society of Plant Pathology, The Plant Pathology Journal, Volume 23, No., 2,
pp. 122, June 2007
- "Inhibition Effects of Nano-silver Liquid against Raffaelea sp.," with
Jiseon Min, Sangwoo Kim, Youngjae Kim, Younsu Lee, and Seungbin
Kim, Abstracts of Presentations at the 2007 Meeting
of the Federation of Korean Microbiological Societies,
Mycobiology, Volume 35, No., 4, pp. 255,
December 2007
- "Inhibition Effect of Nano-silver Liquid (NANOVERTM)
against Raffaelea sp. on Each Different Media,"
with Jiseon Min, Sangwoo Kim, Youngjae Kim, Younsu Lee,
and Seungbin Kim, Abstracts of Presentations at the 2007
Meeting of the Federation of Korean Microbiological Societies,
Mycobiology, Volume 35, No.,
4, pp. 255, December 2007
- "System Configuration for SFCS using Neural Network-based
Distribution Architecture," with Kwang-yeol Ryu and Hyunbo
Cho, presented at 1999 IE/MS Spring Joint Conference,
Taegu, Korea, April 23-24, 1999
- "Event-driven Dynamic Modeling for Manufacturing Systems,"
with Duckyoung Kim, presented at 1999 IE/MS Spring
Joint Conference, Taegu, Korea, April 23-24, 1999
- "Concept and Perspective of Agile Manufacturing," presented
at 1995 New Media World Symposium, Seoul,
Korea, Feb. 1995
- "Development of a Real-Time Material Management Systyem
using Bar Code System," with S.Y. Chang, I.J. Choi, N.C.
Do, and Y.Y. Lee, presented at 1993 KIIE Fall Conference,
Seoul, Korea, Oct. 1993
- "FMS Design using Simulation and Expert System," with
J.H. Hwang, presented at 1991 KIIE Fall Conference,
Seoul, Korea, Oct. 1991
- "A New Approach to Image Data Compression," with K.I.
Oh and J.H. Ahn, presented at 1991 KIIE Fall Conference,
Seoul, Korea, Oct. 1991
- "Sequential Operating Strategy in AS/RS," with M.H. Han,
presented at APORS 1988 Conference, Seoul,
Korea, Aug. 24-26, 1988
- "Optimization for M/M/s Queueing System by using Dynamic
Programming," with E.S. Lee, presented at 1986 ORSA/TIMS
Joint National Meeting, Miami Beach, FL, Oct. 27
- 29, 1986
- "An Evaluation of SPC Time Saver for Statistical Quality
Control," with P.J. Sands and S. Balachandran, presented
at 1986 ORSA/TIMS Joint National Meeting,
Miami Beach, FL, Oct. 27 - 29, 1986
|
|
Contents |
|
|
Technical Papers and Reports (Funded Projects) |
- "A Methodology for Implementing Regional Innovation System toward Self-sustainable
Regional Economy," Final Research Report, National Balanced Development
Committee, Seoul, Korea, 2003
- "Development of a Methodology for Implementing Intelligent Controllers
of Fractal Manufacturing Systems," Final Research Report, Korea Science
& Engineering Foundation, Daejeon, Korea, 2002
- "A Feasibility Study of the East-Sea Marine Biology Research Complex,"
Final Research Report, Policy Research Program 2001-50, Ministry of Science
and Technology, Seoul, Korea, 2002
- "Fractal Architecture for Modeling and Controlling of Agile Manufacturing
Systems," Journal of Dong-Il Culture, Vol. 9, pp. 109-129, 2000
- "Development of Real-Time Dynamic Scheduler for Turbo FMSTM,"
Final Research Report, TurboTek Co. Ltd., Seoul, Korea, 2000
- "Development of Reference Architecture for Automating Manufacturing Systems,"
with H.B. Cho, Final Research Report, Korea Research Foundation, Seoul,
Korea, 1999
- "Realization of Agile Manufacturing using B-ISDN," with H.B. Cho, G.N.
Wang, and S.R. Lee, Industrial Engineering Magazine, Vol. 2, No. 3, pp.
79-85, 1995
- "Automation of Bicycle Production Processes," with H.J. Pahk, Final Research
Report, Ministry of Science and Technology, Seoul, Korea, 1994
- "Automation of Bicycle Production Processes," with S.H. Suh and H.J. Pahk,
1st Year Research Report, Ministry of Science and Technology, Seoul, Korea,
1993
- "An Ergonomic Coach Interior Design for the Korean High Speed Rail," with
E.S. Jung and S.H. Han, Research Report, Korea High Speed Rail Construction
Authority, Seoul, Korea, 1992
- "A Study on Automated Storage and Retrieval System for Steel Coils," with
C.H. Jun, C.K. Suh, and H.G. Wi, Technical Research Journal of the RIST,
Vol. 5, No. 1, pp. 121-130, 1991
- "A Study on Material Flow Simulation of #3 B/T Yard (at Pohang Works of
POSCO)," with K.S. Kim, J.H. Hwang, and K.J. Sohn, Research Report, 1108A,
RIST, Pohang, Korea, 1991
- "Design of AS/RS for Raw Materials at GokSung Plant of KUMHO Tire Co.,"
with K.J. Sohn and J.H. Hwang, Research Report, Shin-Heung Machine Mfg.
Co. Ltd., Seoul, Korea, 1991
- "Development of Material Handling System," Monthly Journal of Factory
Automation and Industrial Engineering, pp. 12-17, Oct. 1991
- "A Study on the Automatic Generation of Assembly Plans," with K.J. Sohn
and K.H. Lee, Technical Report, IE-TR-91-05, Department of Industrial
Engineering, POSTECH, 1991
- "Development of an AS/RS Monitoring Software," with K.J. Sohn and J.H.
Hwang, Technical Report, IE-TR-91-02, Department of Industrial Engineering,
POSTECH, 1991
- "A Study on CAD-based Stowage System," with J.H. Hwang and K.J. Son, Research
Report, 0238F, RIST, Pohang, Korea, 1990
- "Computer Simulation of the AS/RS at SongJung Plant of KUMHO Tire Co.,"
with H.W. Choi, C.H. Jun, and H.G. Wi, Technical Report, IE-TR-90-04,
Department of Industrial Engineering, POSTECH, 1990
- "Design of AS/RS at SongJung Plant of KUMHO Tire Co.," with C.H. Jun and
H.G. Wi, Research Report, SamSung Electronics, Seoul, Korea, 1989
- "Development of a Forecasting Model for Electronic Products," with C.H.
Jun and J. Ko, Research Report, Atworth Engineering Ltd. Seoul, Korea,
1989
- "A Simulation Study of Stainless Steel Making Processes," with K.S. Kim,
Research Report, 8200B, RIST, Pohang, Korea, 1989
- "A Study on the Automated Storage and Retrieval System for Steel Coils
II," with C.H. Jun, C.K. Suh, and H.G. Wi, Research Report, 8121A, RIST,
Pohang, Korea, 1989
- "A Study on the Automated Storage and Retrieval System for Steel Coils
I," with C.H. Jun and M.S. Lee, Research Report, 874300017F-023, Research
Insitute of Industrial Science and Technology (RIST), Pohang, Korea, 1987
- "Drag-Force Analysis for the SPS-11 Bomb," Technical Report, Taejon Machine
Depot, Taejon, Korea, 1978
- "Test-section Improvement by Modifying the Tail Nozzle of Supersonic Wind
Tunnel," with M. Jung, J. Kwon, and G. Kang, Technical Report, Taejon
Machine Depot, Taejon, Korea, 1977
- "Lift-Force Distribution on Modified Fin of the Hawk Missile in Subsonic
Zone," with S.K. Kim, Technical Report, Agency for Defense Development,
Seoul, Korea, 1974
|
|
Contents |
|
|
Ph.D. DISSERTATION & M.S. THESIS SUPERVISED |
- Kiyoul Lee started his Ph.D. degree in September 2005
- "Collaborative Fractal-based Supply Chain Management
Model for Supply Chain Reconfiguration: Production Planning
and Inventory Management ," PhD, Seungjin Oh (currently
working at Samsung Electronics, Korea), September, 2011
- "Virtual Organization Formation with Goal-oriented Trust
Model for Innovative Enterprise Networks," PhD, Jungtae
Mun (currently working at Samsung Electronics, Korea), September,
2009
- "Dynamic Coordination Framework for FrMS (Fractal Manufacturing
Systems)," PhD, Youngpil Cha (currently working at Samsung
Electronics, Korea), Feb. 2009
- "Semantic Web Based Project-oriented Virtual Organization
(ProVO) for Open Innovation," PhD, Hyeongon Wi (currently
working at Research Institute of Industrial Science &
Technology, Pohang, Korea), Feb. 2009
- "Self-evolutionary manufacturing systems: autonomous
goal-formation and goal-oriented dynamic organizing mechanism,"
Ph.D., Moonsoo Shin (Assistant Professor, Hanbat National
University, Daejeon, Korea), Feb. 2008
- "An ontology mapping methodology in an agent-based rice
genome database management system," M.S., Joo-Won Kim (currently
working at a law firm,
Daegu, Korea), August 2005
- "Integrated Discovery Process of Biological Web Services
Using Ontology," M.S., Seunghee Lee, (currently working
at Deloitt Consulting), August 2004
- "Fractal-based Reference Model for Self-reconfigurable
Manufacturing Systems," Ph.D., Kwangyeol Ryu (Associate
Professor, Pusan National University, Pusan, Korea), Feb.
2004
- "Web-based Integration Framework for the Bioinformatics
System," M.S., Jonghwan Shin (currently working at Samsung
Electronics, Korea), Feb. 2003
- "Implementing Agility and Optimization in Dynamic Shop
Floor Scheduling and Control for Zero Latency Enterprise,"
Ph.D., Sanghoon Lee (currently working at Oracle, Korea),
Feb. 2003
- "Perspective and Role of Industrial Engineering in Nanotechnology,"
M.S., Seongbong Cho (currently working at Mindware Co. Ltd.,
Korea), Feb. 2002
- "Mobile Agent-based Negotiation Scheme and its Application
to Dynamic Scheduling," M.S., Moonsoo Shin (Assistant Professor,
Hanbat National University, Daejeon, Korea), Feb. 2002
- "Satisfaction Assessment of Multi-Objective Schedules
Using Neural Fuzzy Methodology," M.S., Youngpil Cha (currently
working at Samsung Electronics, Korea), Feb. 2001
- "EXPRES: An Event Driven Dynamic Scheduling for Distributed
Manufacturing System," M.S., Duckyoung Kim (Assistant Professor,
UNIST, Ulsan, Korea), Feb. 2000
- "Agent-based Information Management System for Heterarchical
SFCS," M.S., Hyungjun Kim (currently working at SK Telecom,
Korea), Feb. 1999
- "System Configuration using Distribution Architecture
for SFCS," M.S., Kwangyeol Ryu (Associate Preofessor, Pusan
National University, Pusan, Korea), Feb. 1999
- "ICPL-based Integrated Communication Architecture for
Heterarchical SFCS," M.S., Sungpil Kwon (currently working
at Samsung Data Systems Inc., Korea), Feb. 1998
- "Manufacturing Process Description Method for Simulation,"
M.S., Daesong Kim (currently working at Nkia Co. Ltd., Korea),
Feb. 1997
- "Automatic Generation of Simulation Model for Shop Floor
Control System," M.S., Sanghoon Lee (currently working at
Oracle, Korea), Feb. 1997
- "Development of an Executor of Processing Equipments
for Heterarchical SFCS," M.S., Soondo Hong (Assistant Preofessor, Pusan
National University, Pusan, Korea), Feb. 1996
- "Development of a Planner of Processing Equipments for
Heterarchical SFCS," M.S., HwaJin Kim, Feb. 1996
- "Development of a Scheduler of Processing Equipments
for Heterarchical SFCS," M.S., SooHyun Cha, Feb. 1996
- "Assembly Sequence Determination from Design Data Using
Voxelization," M.S., ChangHo Lee, Feb. 1995
- "Object-oriented Representation of Manufacturing Resources
for Process Planning," M.S., YoungYeob Lee, Feb. 1995
- "Formal Integration of Process Planning/Control in CIM,"
Ph.D., KyungHuy Lee (Associate Professor, Daejeon University,
Daejeon, Korea), Feb. 1995
- "Development of an Active Vibration Isolation System
using Neural Networks," M.S., KyungGee Ahn, Feb. 1994
- "Development of Error Measurement System for Linear Motion
Table," M.S., SangWook Hwang, Feb. 1994
- "Development of Error Compensating System for Commercial
CMMs," M.S., JongHoo Kim, Feb. 1994
- "A Study on Development of CAD-directed Automated Inspection
System for Product with Sculptured Surface Profile," M.S.,
YoungHo Kim, Feb. 1994
- "Modeling and Control of an FMS using Petri Net," M.S.,
GoJoong Kim (currently working at Samsung Electronics Co.
Ltd., SuWon, Korea), Feb. 1994
- "A Study of Intelligent Part Recognition based on CAD
and Single Image Data," M.S., EuiSuk Kim (currently working
at HyunDai Motors, R&D Center, NamYang, Korea), Feb.
1993
- "A Study on the Road Following of an Autonomous Vehicle,"
M.S., BumJu Park, Feb. 1992
- "A Study on the Determination of Assembly Sequence,"
M.S., MooGyeong Jang, POSTECH, Korea), Feb. 1992
- "A Study on the Intelligent FMS Designer," M.S., JongHyun
Hwang (deceased), Feb. 1992
- "A Study on Determination of Assembly Sequences Based
on Neural Network," M.S., KyungJoon Sohn (currently working
at LG-CNS, Seoul, Korea), Feb. 1992
- "A Study of 3-D Object Recognition Based on Robot Vision,"
Ph.D., SangYong Rhee (Professor, KyungNam University,
Masan, Korea), Feb. 1992
- "Design of AGV Guide-Path Layout: Rule-based and Simulation
Approach," M.S., HaeWoon Choi, Feb. 1991
|
|
Contents |
|
|